Brew Express BE-110 Spezifikationen PDF herunterladen (Seite 9)

12 1/4"

312.4mm

13 3/8"

340mm

3 7/8"

96.9 mm

11 3/8"

289.3mm

6 1/4"

158.3mm

11 1/4"

286.9 mm

3 7/8"

98.0 mm

1/2”

12.8 mm

11 1/2"

292.1 mm

AREA ON WALL

TO BE CUT

(USE TEMPLATE)

5/8"

15.7 mm

11 1/2"

292.1 mm

BE-110 SPECIFICATIONS: (Specs for the BE-104 are on page 5)

Read and follow instructions carefully before installing your BREW EXPRESS in-the-wall

COFFEE SYSTEM. For best results, it is advised that you hire a qualiﬁed professional.

1. Overall Dimensions(FinishedUnitwithRough-in-Box)approximately121/4”X133/8”(seebelow).

2. Dimensions for Rough-in-Box(MountingStructure)approximately11.5”X11.5”.

3. Electrical Requirements 120VAC, 60HZ. (1400 watts).

4. Water Requirements1/4”ODwatersupplyline(copperorpoly)minimum30psitoamaximumof

90 psi. Potable COLD water is required.

NOTE: If water is not available, an alternate water dispenser jug (5 gallons) can be used with the

optional pump accessory (not supplied). Contact Lance Larkin for more information.

Please Note: A ﬁlter and shut off valve at water source is recommended. The ﬁlter, such as an ice maker type ﬁlter,

can easily be installed at the source. If water lines are not purged or clear of debris or a ﬁlter is NOT installed, foreign

particles (debris) in water may clog brewer system causing failure, and will void all warranties.

SPECIFICATIONS AND REQUIREMENTS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Keine Kommentare

Brew Express BE-110 Spezifikationen Seite 9